Orders and Installations

  • [Order]

    Red Bud Industries Receives Slitting Line Order from Lapham Hickey Steel Corporation

    Red Bud Industries recently received an order for a High Speed Slitting Line for Lapham Hickey Steel Corporation. Lapham-Hickey Steel is a 4th generation family owned and operated full-line carbon service center that was founded in 1926 and is headquartered in Bedford Park, IL. With 11 total locations throughout the Midwest, East Coast and Southeast, Lapham-Hickey is an industry-leading supplier of slit coil, sheet, plate, bars, tubing and fabricated products.  The new 60” (1525 mm) by 60,000 lbs (27,000 kg) […]
    Read More

  • [Installation]

    Red Bud Industries Ships Slitting Line to National Material of Mexico

    Red Bud Industries, located in Red Bud, Illinois USA, recently shipped and installed an Advanced High Strength Steel High Speed Slitting Line to National Material of Mexico (NMM), a subsidiary of National Material L.P., located in Monterrey, Mexico. The new .250” (6mm) x 72” (1830mm) line, which was operational in November 2017, is capable of processing AHSS Automotive Steel and other surface critical material with tensile strengths up to 250,000 psi (1725 MPa). The line incorporates Red Bud Industries’ “precision […]
    Read More

  • [Order]

    Petersen Aluminum Corporation Orders Red Bud Industries’ Light Gage Slitting Line

    Red Bud Industries has received an order for a Light Gage Slitting Line from Petersen Aluminum Corp., manufacturer of PAC-CLAD metal roof and wall products located in Elk Grove Village, Illinois. This line will be the sixth Light Gage Slitting Line that Petersen has ordered from Red Bud Industries. Petersen also operates three Red Bud Industries’ Blanking Lines. The new Light Gage Slitting Line will provide Petersen Aluminum with a low cost, low passline, small footprint Slitting Line that eliminates […]
    Read More

  • [Order]

    Red Bud Industries Receives Slitting Line Order from National Material of Mexico

    Red Bud Industries, located in Red Bud, Illinois USA, recently received an order for an Advanced High Strength Steel High Speed Slitting Line from National Material of Mexico (NMM), a subsidiary of National Material L.P., located in Apodaca, Mexico. The new .250″ (6mm) x 72″ (1830mm) line is capable of processing AHSS Automotive Steel and other surface critical material with tensile strengths up to 250,000 psi (1725 MPa). The line will incorporate Red Bud Industries’ “precision large arbor technology” which […]
    Read More

  • [Order]

    Red Bud Industries Receives Order for Three Light Gage Slitting Lines From Petersen Aluminum Corporation

    Red Bud Industries has received an order for three Light Gage Slitting Lines from Petersen Aluminum Corporation, a supplier of metal architectural products located in Elk Grove Village, Illinois. This will be Petersen’s third, fourth, and fifth Slitting Line and their eighth overall line purchase from Red Bud Industries. The new machines will provide Petersen Aluminum with three low cost, low passline, small footprint Slitting Lines that eliminate the need for costly foundation work. Petersen Aluminum’s new equipment will consist […]
    Read More

  • [Installation]

    Petersen Aluminum Installs Two New Red Bud Industries’ Slitting Lines

    Petersen Aluminum Corporation, Elk Grove Village, Illinois, a manufacturer of metal roofing panels, installed two new Red Bud Industries’ Slitting Lines. The new lines were designed and built to process prepaint material and were installed at Petersen’s Acworth, Georgia, and Tyler, Texas, facilities. The new lines provide Petersen with low cost, low passline, small footprint Slitting Lines that eliminate the need for costly foundation work. Petersen’s new Red Bud Industries’ Slitting Lines consist of a Traversing Uncoiler, Support Table with […]
    Read More

  • [Installation]

    MIDWAY METALS OF YATALA INSTALLS NEW RED BUD SLITTING LINE

    Midway Metals of Yatala, Queensland, Australia installed an 8 mm (.315”) Red Bud Slitting Line at its new site in Yatala, Queensland. The new Slitting Line joins a Red Bud Precision Blanking Line with Stretcher Leveler already in operation at the site. The new line was designed and built to process stainless steel, cold roll, and galvanized material at widths up to 2134 mm (84”) with coil weights up to 13,600 kg (30,000 lb). The new line features Red Bud’s […]
    Read More

  • [Installation]

    Rudolf Flender Rohr GmbH INSTALLS RED BUD INDUSTRIES HIGH SPEED SLITTING LINE

    Rudolf Flender Rohr GmbH of Siegen, Germany, has completed installation of a new Red Bud Industries Precision Slitting Line. The new Slitting Line will play an integral role in the production of welded steel pipes at Flender and is part of a major upgrade to their manufacturing facility. The new Red Bud Line is capable of slitting material up to 8 mm (.315”) thick and production speeds up to 610 m/min (2000 FPM). The line can handle incoming coil weights […]
    Read More

  • [Installation]

    RED BUD INDUSTRIES INSTALLS SLITTING LINE FOR STEEL TECHNOLOGIES DE MEXICO, S.A. DE C. V.,CIUDAD JUAREZ, MEXICO

    Red Bud Industries completed the installation of a new .187″ (4.75 mm) Slitting Line for Steel Technologies de Mexico, S.A. de C. V., a subsidiary of Steel Technologies, Inc., at their newly constructed service center in Ciudad Juarez, Mexico. The state-of-the-art line features a newly designed Dual Turret Recoiler capable of moving slit coils offline quickly and easily. In addition to the advanced Dual Turret Recoiler, the line also features Red Bud’s Tension Trac and Camber Trac Systems. The Tension […]
    Read More