Orders and Installations

  • [Order]

    Red Bud Industries Receives Stretcher Leveler Retrofit Order from Allied Steelrode PTY LTD

    Red Bud Industries, located in Red Bud, Illinois USA, recently received an order for a 13 mm x 2130 mm Stretcher Leveler Retrofit from Allied Steelrode PTY LTD, a steel service center, located in Randhart, South Africa. The new Stretcher will complement a complete Red Bud Line with a Stretcher Leveler that was installed in 2015 at their Meyerton facility. A Red Bud Stretcher Leveler can produce the flattest, most stable material possible while operating virtually independent of incoming strip […]
    Read More

  • [Installation]

    pacific

    Red Bud Industries Ships Heavy Gage Cut-To-Length Line to Pacific Steel & Recycling

    Red Bud Industries recently shipped a .500” (12.7 mm) x 96” (2438 mm) Heavy Gage Cut-To-Length Line with Stretcher Leveler to Pacific Steel & Recycling’s Syracuse, Utah, location. Red Bud Industries is located in Red Bud, Illinois USA. The line includes a 50’ (15 M) Stretcher Leveler with “SUREGRIP®” technology that allows HRP&O and other hard to grip material to be run without slippage or having to change the gripper pads. The non-slip metallic grippers can also be used for […]
    Read More

  • [Installation]

    alliance37-rbiedit-web

    Red Bud Industries Ships Blanking Line to Alliance Steel Corporation

    Red Bud Industries recently shipped a .375” ( 9.5 mm) x 72” (1830 mm) Blanking Line with Stretcher Leveling to Alliance Steel Corporation, a steel service center located in Bedford Park, Illinois. The Stretcher Leveler includes “SUREGRIP®” technology that allows all material such as HR, Pickled & Oiled or even Coated products such as Galvanized and other hard to grip materials to be run without slippage or having to change the gripper pads. The non-slip metallic grippers can also be […]
    Read More

  • [Order]

    Red Bud Industries Receives Order from Kloeckner Metals

    Red Bud Industries recently received an order for a .625” (16 mm) x 84” (2100 mm) Cut-To-length Line with Stretcher Leveling from Kloeckner Metals, Chicago, Illinois. The Stretcher Leveler features “SUREGRIP®” technology that allows HR P&O material and other hard to grip material to be run without slippage or having to change the gripper pads. The non-slip metallic grippers can also be used for up to a year or longer without needing to be replaced. “The addition of the Stretch […]
    Read More

  • [Installation]

    Heavy Gage Cut To Length with Stretcher Leveler

    Paxton & Vierling Steel Company

    Red Bud Industries celebrated a landmark earlier this year by processing the first 1.00″ (25.4 mm) thick coil on a Red Bud Line. The line is installed at Paxton & Veirling Steel Company at its Omaha, Nebraska, facility. Not only is this the biggest Cut-To-Length Line ever built by Red Bud Industries, it is also one of the largest in the world. The line includes a 3000 ton (2678 metric ton ) Stretcher Leveler featuring our SUREGRIP® system. This technology […]
    Read More

  • [Installation]

    stretcher leveler

    FerrouSouth Installs Red Bud Stretcher Leveler Retrofit

    FerrouSouth, located in Iuka, Mississippi, installed a Red Bud Industries’ .250” (6 mm) x 72” (1830 mm) Stretcher Leveler with SUREGRIP® technology in an existing Cut-To-Length Line. This was FerrouSouth’s second Stretcher installation at this facility. Because this particular line primarily runs lighter gage material, maintaining high throughput was an important factor in the selection process. The Red Bud Stretcher was selected due to its quick cycle time. In addition, its specially designed grippers also eliminated the need to use/change […]
    Read More

  • [Installation]

    stretcher leveller

    Russel Metals Installs Red Bud Stretcher Leveler Retrofit

    Russel Metals, located in Mississauga, Ontario, Canada, installed a Red Bud Industries’ .250” (6 mm) x 72” (1830 mm) Stretcher Leveler with SUREGRIP® technology in an existing Cut-To-Length Line at their B&T Steel Division in Stoney Creek, Ontario. The Stretcher Leveler and its accompanying components were part of a major upgrade of capabilities at the Stoney Creek facility. The new Stretcher Leveler produces the flattest, most stable material possible while operating virtually independent of incoming strip shape and severity. The […]
    Read More

  • [Installation]

    mcneilus stretcher leveler

    McNeilus Steel Installs Fourth Red Bud Stretcher Leveling Line

    McNeilus Steel installed a .500” (12.7 mm) Cut-To-Length Line with a Stretcher Leveler with SUREGRIP® technology from Red Bud Industries at their Fond Du Lac, Wisconsin, facility. This is the fourth Stretcher Leveling Line that McNeilus has installed from Red Bud Industries. It joins the two lines at their Dodge Center, Minnesota, facility and the line at their Fargo, North Dakota, service center. The new line features a number of new innovations that increase line speed and throughput. The system […]
    Read More

  • [Order]

    Heavy Gage Cut-To-Length Line with Stretcher Leveler

    Allied Steelrode Orders Red Bud Heavy Gage Cut-To-Length Line

    Allied Steelrode Pty Ltd of Randhart, South Africa, purchased a Red Bud Industries’ Heavy Gage Cut-To-Length Line with SUREGRIP® Stretcher Leveler. The Line will be capable of processing material up to .473” (12 mm) thick at material widths up to 87” (2200 mm) wide at coil weights up to 73,000 lb. (33,113 kg). The new Cut-To-Length Line was purchased by Allied Steelrode as part of their commitment to their customers to provide the best possible end product available in terms […]
    Read More

  • [Installation]

    Heavy Gage Cut-To-Length Line with Stretcher Leveler

    Ratner Steel Installs Third Red Bud Stretcher Leveler

    Ratner Steel of Roseville, Minnesota, installed a 77” wide by .500” Cut-To-Length Line with a “SUREGRIP®” Adjustable Stretcher Leveler from Red Bud Industries. The new line can handle coils up to 80,000 lb. and also features a 48’ Stacker with dual 60,000 lb. Stack Tables. The new hybrid line runs in both start/stop and looping modes. Thicker material is run in start/stop mode while 5/16” and lighter material runs in a loop. The loop allows up to 80% higher productivity […]
    Read More

  • [Installation]

    stretcherjdm4

    JDM STEEL SERVICE INSTALLS RED BUD .500” STRETCHER LEVELER

    JDM Steel Service of Chicago Heights, Illinois, installed a Red Bud Industries’ .500” x 72” Stretcher Leveler. The Stretcher was installed in an existing line as part of a major upgrade of JDM’s processing capabilities. The Stretcher Leveler will process material up to .500” (13 mm) at 72” (1830 mm) wide. Due to trapped internal stresses, once material is cut, it can spring back. Stretcher leveling exceeds the yield in all of the material top to bottom and side to […]
    Read More

  • [Installation]

    AB Steel_022

    ABINSA S.A. DE C.V. INSTALLS RED BUD STRETCHER LEVELER

    Abinsa S.A. de C.V. of Apodaca, Nuevo Leon, Mexico, installed a Red Bud Industries Stretcher Leveler. The Stretcher Leveler is part of Abinsa’s commitment to provide their customers with the flattest, most stable material possible. The Stretcher was installed in an existing line as part of a major upgrade of Abinsa’s processing capabilities. The Stretcher Leveler will process material up to .750” (19 mm) at 74” wide. Due to trapped internal stresses, once material is cut, it can spring back. […]
    Read More

  • [Installation]

    mcneilus_fargo_line

    MCNEILUS STEEL INSTALLS THIRD RED BUD STRETCHER LEVELING LINE

    Red Bud Industries installed a .500″ (12.7 mm) Cut-To-Length Line with a Stretcher Leveler at McNeilus Steel’s new Fargo, North Dakota, facility. This is the third Stretcher Leveling Line that McNeilus has purchased from Red Bud Industries. It joins the two lines already in production at their Dodge Center, Minnesota, facility. A Red Bud Stretcher Leveler can produce the flattest most stable material possible virtually independent of incoming strip shape and severity. The operator simply stretches the material until it […]
    Read More

  • [Installation]

    SONY DSC

    INSTALLATION AT JANCO STEEL LIMITED

    Janco Steel Limited, Stoney Creek, Ontario, Canada, has undergone a major expansion of their service center including expansion of their processing capabilities. As a part of this expansion, they installed a Red Bud Industries .25” x 72” x 80,000 lb combination Stretcher Leveler/Multi-Blanking Line. The new line can multi-blank material up to .188” (4.7 mm) thick and cut-to-length, edge trim, and stretcher level material up to .250” (6.35 mm). Featured in the line is Red Bud’s new Fully Automatic CNC […]
    Read More

  • [Installation]

    macsteel

    MSCSA-MACSTEEL SERVICE CENTERS OF SOUTH AFRICA INSTALLS RED BUD STRETCHER LEVELER

    MSCSA of Wadeville, South Africa, installed a Red Bud Industries Sure Grip Stretcher Leveler. The Stretcher Leveler was added as part of Macsteel’s commitment to be the leader in the South African market for supply of stress relieved panel flat material to the laser industry. The Stretcher Leveler was installed as part of a half line retrofit of an existing Cut-To-Length Line. The Stretcher Leveler will process material up to 13 mm (.500”) at widths up to 2134 mm (84”). […]
    Read More

  • [Installation]

    packer_yadpaz

    NEW RED BUD MULTI-CUT BLANKING LINE INSTALLED BY PACKER YADPAZ PROFILES LTD

    Packer Yadpaz Profiles Ltd of Kiryat Malachi, Israel, has installed a Red Bud Industries Multi-Cut Blanking Line with Stretcher Leveler. The new line allows Packer to provide its customers with exceptionally flat, stress relieved material with length and width tolerances that are the best in the industry. A Red Bud Stretcher Leveler will produce the flattest most stable material possible virtually independent of incoming strip shape and severity. The operator simply stretches the material until it is flat. The result […]
    Read More

  • [Installation]

    olympic_line

    OLYMPIC STEEL INSTALLS NEW RED BUD BLANKING LINE

    Red Bud Industries installed a .375″ (9.52 mm) Blanking Line with a Stretcher Leveler at Olympic Steel’s Plymouth, Minnesota, facility. Olympic decided to add the Heavy Gage Line in order to meet their customers’ demands for laser quality, low stress, and heavy gage material. A Red Bud Stretcher Leveler can produce the flattest, most stable material possible while operating virtually independent of incoming strip shape and severity. The operator simply stretches the material until it is flat. The result is […]
    Read More

  • [Installation]

    mcneilus1

    RED BUD INDUSTRIES AWARDED 1/2″ STRETCHER LEVELING LINE BY MCNEILUS STEEL, INC.

    In 2002, McNeilus Steel, Inc. of Dodge Center, Minnesota, was looking for ways to improve the quality of their existing Coil Processing Lines. They looked at several alternatives, including a Temper Mill, to improve their quality and efficiency. After an extensive study, they decided to purchase a Precision Multi-Blanking Line from Red Bud Industries of Red Bud, Illinois. The new line included Red Bud’s Heavy Gage Stretcher Leveler which Red Bud claimed would provide better quality finished material more competitively […]
    Read More

  • [Installation]

    stretch_holvoet

    RED BUD INDUSTRIES INSTALLS MULTIPLE COIL PROCESSING SYSTEMS AT HOLVOET PLAATBEDRIJF NV, GENT, BELGIUM

    Holvoet Plaatbedrijf NV, a service center chain headquartered in Kortrijk, Belgium, was looking for ways to address the issue of retained stress in material for their manufacturing and laser markets and also add new products to their product line. After an extensive evaluation of suppliers from Europe and United States, Red Bud Industries Equipment was selected. Two systems were purchased and installed at Holvoet’s Gent facility. The systems include an  .315 (8 mm), 79″ (2 meter) wide loop type Cut-To-Length/Blanking […]
    Read More